F.E.Cellier - Publications Related to
Computer-Aided Control System Design
 
Books
  - Cellier, F.E., S.E. Mattsson, and J.O. Gray, Eds. (1994),
      Computer-Aided Control System Design,
      Proc. of the 1994 IEEE/IFAC Joint Conference,
      Tucson, AZ, March 7-9, 1994, IEEE #94TH0619-7,
      ISBN: 0-7803-1800-5, 609 p.
 
Chapters in Books
  - Cellier, F.E. (1990),
      
         Rechnerunterstützter Entwurf von Regelungssystemen -
         Verfahren und Werkzeuge,
      Simulation in der Regelungstechnik (K.H. Fasol und K.
      Diekmann, eds.),
      Springer-Verlag, Berlin, pp.57-73.
      
 
  
 - Cellier, F.E., H. Elmqvist, M. Otter (1995),
      
         Modeling from Physical Principles,
      The Control Handbook (W.S. Levine, ed.), CRC Press, Boca
      Raton, FL, pp.99-108.
      
 
  
 - Cellier, F.E., H. Elmqvist, and M. Otter (2000),
      
         Modeling from Physical Principles,
      Control System Fundamentals, (W.S. Levine, ed.), CRC
      Press, Boca Raton, FL, pp. 99-108.
      
 
  
 - Cellier, F.E., and C.M. Rimvall (1987),
      
         Computer-Aided Control Systems - Techniques and Tools,
      Systems Modeling and Computer Simulation (N. Kheir, ed.), Marcel
      Dekker, New York, pp.631-679.
      
 
  
 - Cellier, F.E., and C.M. Rimvall (1995),
      
         Computer-Aided Control System Design: Techniques and
         Tools,
      Systems Modeling and Computer Simulation (N. Kheir, ed.), second
      edition, Marcel Dekker, New York, pp.413-453.
      
 
  
 - Cellier, F.E., L.C. Schooley, M.K. Sundareshan and B.P. Zeigler
      (1992),
      
         Computer-Aided Design of Intelligent Controllers: Challenge of
         the Nineties,
      Recent Advances in Computer Aided Control Systems Engineering
      (M. Jamshidi and C.J. Herget, eds.), Elsevier Science Publishers,
      Amsterdam, the Netherlands, pp.53-80.
      
 
  
 - Otter, M., and F.E. Cellier (1995),
      
         Software for Modeling and Simulating Control Systems,
      The Control Handbook (W.S. Levine, ed.),
      CRC Press, Boca Raton, FL, pp.415-428.
      
 
  
 - Otter, M., and F.E. Cellier (2000),
      
         Software for Modeling and Simulating Control Systems,
      Control System Fundamentals (W.S. Levine, ed.),
      CRC Press, Boca Raton, FL, pp.419-432.
      
 
  
 - Rimvall, C.M. and F.E. Cellier (1985),
      
         A Structural Approach to CACSD,
      Computer-Aided Control Systems Engineering (M. Jamshidi, and C.J.
      Herget, eds.), North-Holland Publishing, pp.149-158.
      
 
  
 - Zeigler, B.P., S.D. Chi, and F.E. Cellier (1991),
      
         Model-Based Architecture for High Autonomy Systems,
      Engineering Systems with Intelligence - Concepts, Tools and
      Applications (S.G. Tzafestas, ed.),
      Kluwer Academic Publishers, Dordrecht, the Netherlands, pp.3-22.
      
 
 
Journal Papers
  - Cellier, F.E., and F. Mugica (1995),
      
         Inductive Reasoning Supports the Design of Fuzzy
         Controllers,
      J. Intelligent & Fuzzy Systems, 3(1), pp.71-85.
      
 
  
 - de Albornoz, A., and F.E. Cellier (1994),
      
         Building Intelligence into an Autopilot - Using Qualitative
         Simulation to Support Global Decision Making,
      Simulation, 62(6), pp.354-363.
      
 
  
 - James, J., G. Pang, F.E. Cellier, J. Gray, and S.E. Mattsson
      (1995),
      
         The State of Computer-Aided Control System Design (CACSD),
      IEEE Control Systems, 15(2), pp.6-7 and pp.98-99.
      
 
  
 - Mansour, M., W. Schaufelberger, F.E. Cellier, G. Maier, and C.M.
      Rimvall (1984),
      
         The Use of Computers in the Education of Control Engineers at
         ETH Zurich,
      European J. Engineering Education, 9, pp.135-151.
      
 
  
 - Sanz, V., A. Urquía, F.E. Cellier, and S. Dormido (2011),
      
         Modeling of Hybrid Control Systems Using the DEVSLib Modelica
         Library,
      Control Engineering Practice,
      doi:10.1016/j.conengprac.2010.11.014.
      
 
  
 - Schooley, L.C., F.E. Cellier, B.P. Zeigler, A. Doser, and G.R.
      Farrenkopf (1991),
      
         Modeling, Simulation, and Control of an Extraterrestrial
         Oxygen Production Plant,
      SERC Newsletter, 3(1). 
  
 - Schooley, L.C., F.E. Cellier, F.-Y. Wang, and B.P. Zeigler
      (1991),
      
         Modeling, Simulation, and High-autonomy Control of a Martian
         Oxygen Production Plant,
      SERC Newsletter, 3(2). 
  
 - Schooley, L.C., B.P. Zeigler, F.E. Cellier, and F.-Y. Wang
      (1993),
      
         High-Autonomy Control of Space Resource Processing Plants,
      IEEE Control Systems, 13(3), pp.29-39.
      
 
  
 - Vesanterä, P.J., and F.E. Cellier (1989),
      
         Building Intelligence into an Autopilot Using Qualitative
         Simulation to Support Global Decision Making,
      Simulation, 52(3), pp.111-121.
      
 
  
 - Zeigler, B.P., F.E. Cellier, and J.W. Rozenblit (1988),
      
         Design of a Simulation Environment for Laboratory Management
         by Robot Organizations,
      J. of Intelligent and Robotic Systems, 1,
      pp.299-309.
      
 
Keynote Addresses
  - Cellier, F.E., and C.M. Rimvall (1983),
      
         Computer Aided Control Systems Design,
      Proc. ESC'83, First European Simulation Congress,
      Aachen, Germany, pp.1-21.
      
 
  
 - Cellier, F.E., and B.P. Zeigler (1987),
      
         AI's Role in Control of Systems: Structural and Behavioral
         Knowledge,
      Proc. ESM'87, European Simulation MultiConference,
      Vienna, Austria, pp.165-171.
      
 
  
 - Zeigler, B.P., S.D. Chi, and F.E. Cellier (1991),
      
         Model-Based Architecture for High Autonomy Systems,
      Proc. EURISCON'91 - European Robotics and Intelligent Systems
         Conference,
      Corfu, Greece, pp.3-22.
      
 
 
Contributed Conference Papers
  - Agathoklis, P., F.E. Cellier, M. Djordjevic, P.O. Grepper, and
      F.J. Kraus (1979),
      
         Educational Aspects of Using Computer-Aided Design in
         Automatic Control,
      Proc. IFAC Symp. Computer-Aided Design in Control Systems,
      Zurich, Switzerland, pp.441-446.
      
 
  
 - Cellier, F.E. (1987),
      
         Computer-Aided Control System Design Software: Standardization 
         vs. Diversification,
      Proc. 10th IFAC World Congress on Automatic
      Control,
      Munich, Germany, Vol.11, p.54.
      
 
  
 - Cellier, F.E., and S.D. Chi (1991),
      
         Numerical Properties of Trajectory Representations of
         Polynomial Matrices,
      Proc. CADCS'91, Computer-Aided Design in Control Systems,
      Swansea, Wales, U.K., pp.173-177.
      
 
  
 - Cellier, F.E., P.O. Grepper, D.F. Rufer, and J. Tödtli
      (1977),
      
         Educational Aspects of Development and Application of a
         Subprogram-Package for Control,
      Proc. IFAC Symp. Trends in Automatic Control Education,
      Barcelona, Spain, pp.151-159.
      
 
  
 - Cellier, F.E., and F. Mugica (1992),
      
         Systematic Design of Fuzzy Controllers Using Inductive
         Reasoning,
      Proc. IEEE Intelligent Control Conference,
      Glasgow, Scotland, pp.198-203.
      
 
  
 - Cellier, F.E., and C.M. Rimvall (1987),
      
         Computer-Aided Control System Design: Techniques and
         Tools,
      Proc. 4th Intl. Symp. Modeling and Simulation
      Methodology,
      Tucson, AZ.
      
 
  
 - Cellier, F.E., L.C. Schooley, B.P. Zeigler, A. Doser, G.
      Farrenkopf, J.W. Kim, Y.D. Pan, and B. Williams (1992),
      
         Watchdog Monitor Prevents Martian Oxygen Production Plant from
         Shutting Itself Down During Storm,
      Proc. ISRAM'92, International Symposium on Robotics and
         Manufacturing,
      Santa Fe, NM, pp.697-704.
      
 
  
 - Chi, S.D., B.P. Zeigler, and F.E. Cellier (1991),
      
         Model-Based Task Planning System for a Space Laboratory
         Environment,
      Proc. SPIE Symp. on Cooperative Intelligent Robots in
      Space,
      Boston, MA, Vol.1387, pp.182-193.
      
 
  
 - de Albornoz, A., and F.E. Cellier (1993),
      
         Qualitative Simulation Applied to Reason Inductively About the
         Behavior of a Quantitatively Simulated Aircraft Model,
      Proc. QUARDET'93, IMACS Intl. Workshop on Qualitative
         Reasoning and Decision Technologies,
      Barcelona, Spain, pp.711-721.
      
 
  
 - de Albornoz, A.,- and F.E. Cellier (1993),
      
         Variable Selection and Sensor Fusion in Automatic Hierarchical
         Fault Monitoring of Large Scale Systems,
      Proc. QUARDET'93, IMACS Intl. Workshop on Qualitative
         Reasoning and Decision Technologies,
      Barcelona, Spain, pp.722-734.
      
 
  
 - Marner, W.J., J.W. Suitor, L.C. Schooley, and F.E. Cellier
      (1990),
      
         Automation and Control of Off-Planet Oxygen Production
         Processes,
      Proc. Space'90, Engineering, Construction, and Operation in
      Space,
      New York, Vol.1, pp.226-235.
      
 
  
 - McBride, R.T. and F.E. Cellier (2005),
      
         System Efficiency Measurement Through Bond Graph Modeling,
      Proc. ICBGM´05, 7th SCS Intl. Conf. on Bond
         Graph Modeling and Simulation,
      New Orleans, Louisiana, pp. 221-227.
      
 
      
 
  
 - McBride, R.T. and F.E. Cellier (2005),
      
         Optimal Control Gain Selection Using the Power Flow
         Information of Bond Graph Modeling,
      Proc. ICBGM´05, 7th SCS Intl. Conf. on Bond
         Graph Modeling and Simulation,
      New Orleans, Louisiana, pp. 228-232.
      
 
      
 
  
 - Mugica, F., and F.E. Cellier (1994),
      
         Automated Synthesis of a Fuzzy Controller for a Cargo Ship
         Steering by Means of Qualitative Simulation,
      Proc. ESM'94, European Simulation MultiConference,
      Barcelona, Spain, pp.523-528.
      
 
  
 - Nebot, A., F.E. Cellier, and D.A. Linkens (1993),
      
         Controlling an Anaesthetic Agent by Means of Fuzzy Inductive
         Reasoning,
      Proc. QUARDET'93, IMACS Intl. Workshop on Qualitative
         Reasoning and Decision Technologies,
      Barcelona, Spain, pp.345-356.
      
 
  
 - Pan, Y.D., and F.E. Cellier (1994),
      
         Analytical Controller Design Strategy for Remotely Operated
         Systems with Long Time Delays,
      Proc. CACSD'94, IEEE/IFAC Joint Symp. Computer-Aided Control
         System Design,
      Tucson, AZ, pp.601-602.
      
 
  
 - Rimvall, C.M., and F.E. Cellier (1984),
      
         IMPACT: Interactive Mathematical Program for Automatic Control 
         Theory,
      Proc. 6th Intl. Conf. Analysis and Optimization of
      Systems,
      Nice, France, pp.578-597.
      
 
  
 - Rimvall, C.M., F. Schmid, and F.E. Cellier (1986),
      
         The Different Modeling Capabilities of IMPACT,
      Proc. IEEE Symp. Computer-Aided Control System Design,
      Arlington, VA.
      
 
  
 - Sarjoughian, H.S., F.E. Cellier, and B.P. Zeigler (1990),
      
         Distributed Intelligent Agents and Hierarchical Diagnostic
         Units for Semi-Autonomous Teleoperation of a Fluid Handling
         Laboratory,
      Proc. Phoenix Conf. Computer and Communication,
      Scottdale, AZ, pp.795-802.
      
 
  
 - Schooley, L.C., and F.E. Cellier (1989),
      
         Automation and Control Philosophy,
      Proc. AESOP-89, Workshop on Automation of Extraterrestrial
         Systems for Oxygen Production,
      La Jolla, CA, pp.7-17.
      
 
  
 - Schooley, L.C., and F.E. Cellier (1989),
      
         Monitoring and Control Systems for Automated Process
         Plants,
      Proc. AIS-89, SERC Space Mining and Manufacturing
      Symposium,
      Tucson, AZ, pp.IV:7-20.
      
 
  
 - Schooley, L.C., and F.E. Cellier (1989),
      
         Telescience: Remote Interaction with Scientific
         Experiments,
      Proc. TRI-89, Canadian Information Processing Society
         Conference on Telepresence and Remote Interaction,
      Edmonton, Alberta, Canada.
      
 
  
 - Schooley, L.C., F.E. Cellier, and D.G. Schultz (1988),
      
         Remote Teleoperation of an Astrometrical Telescope Facility
         and a Fluid Handling Laboratory for Space Station,
      Proc. TTPP-II, Telescience Testbed Pilot Program Conf.,
      Boulder, CO. 
  
 - Schooley, L.C., F.E. Cellier, F.-Y. Wang, and B.P. Zeigler
      (1993),
      
         Intelligent Control and Communication Systems,
      Proc. AIS-93, Smaller, Cheaper, Faster Missions to the Moon
      and Mars,
      Tucson, AZ, pp.50-70.
      
 
Ph.D. Dissertations
  - Chi, S.D. (1991).
      
         Modelling and Simulation for High Autonomy Systems,
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ.
      
 
  
 - McBride, R.T. (2005),
      
         System Analysis Through Bond Graph Modeling,
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ.
      
 
      
 
  
 - Mugica, F. (1995),
      
         Diseño Sistemático de Controladores Difusos
         Usando Razonamiento Inductivo,
      Llenguatges i Sistemes Informàtics, Universitat
      Politècnica de Catalunya, Barcelona, Spain.
      
 
  
 - Rimvall, C.M. (1986),
      
         Man-Machine Interfaces and Implementational Issues in
         Computer-Aided Control System Design,
      Swiss Federal Institute of Technology, ETH Zurich, Switzerland.
      
 
MS Theses
  - Bates, F. (1997),
      
         Modeling and Simulation of a Focusing Servo Control System for
         an Optical Disk Tester,
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ.
      
 
  
 - Hack, B.W.J. (1988),
      
         Man to Machine, Machine to Machine and Machine to Instrument
         Interfaces for Teleoperation of a Fluid Handling
         Laboratory,
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ. 
  
 - Kury, P.M. (1990),
      
         An Intelligent Fault Diagnoser for Distributed Processing in
         Telescience Applications,
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ.
      
 
  
 - Lew, A.K. (1988),
      
         Astrometric Telescope Simulator for the Design and Development
         of Telescope Teleoperation,
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ. 
  
 - Motaabbed, A. (1992),
      
         A Knowledge Acquisition Scheme for Fault Diagnosis in Complex
         Manufacturing Processes,
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ.
      
 
  
 - Pan, Y.D. (1987),
      
         Teleoperation of Mechanical Manipulators Aboard the U.S. Space
         Station,
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ. 
  
 - Roddier, N. (1989),
      
         Curvature Sensing for Adaptive Optics: A Computer
         Simulation,
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ.
      
 
  
 - Sarjoughian, H.S. (1989),
      
         Intelligent Agents and Hierarchical Constraint Driven
         Diagnostic Units for a Teleoperated Fluid Handling
         Laboratory,
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ.
      
 
  
 - Sos, G.T. (1989),
      
         Design of an Object-Oriented Syntax for UIL, the User
         Interface Language of the Space Station Freedom,
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ.
      
 
  
 - Vesanterä, P.J. (1988),
      
         Qualitative Flight Simulation: A Tool for Global Decision
         Making,
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ.
      
 
  
 - Wang, Q. (1989),
      
         Management of Continuous System Models in DEVS-Scheme: Time
         Windows for Event-Based Control,
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ.
      
 
Internal Reports
  - Cellier, F.E. (1987),
      
         Teleoperation of the Thaw Telescope at the Allegheny
         Observatory: A Case Study,
      Technical Report TSL-004/87,
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ. 
  
 - Cellier, F.E., R. Davis, C. Grim, and C. Shaw (1989),
      
         Specification for the Space Station User Interface Language
         (UIL),
      Version 1.0, Space Station User Support Environment Working Group
      (USEWG), June, 1989. 
  
 - Cellier, F.E., R. Davis, C. Grim, and C. Shaw (1990),
      
         Space Station Freedom Program - User Interface Language
         Specification: USE 1001,
      Version 2.0, Space Station User Support Environment Working Group
      (USEWG), January, 1990. 
  
 - Pan, Y.D., and A.K. Lew (1988),
      
         Teleoperations Software for Remote Fluid Handling,
      Technical Report TSL-020/88,
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ. 
  
 - Raize, E. (1988),
      
         Syringe Driver Assembly for Automated Fluid Handling
         Laboratory,
      Technical Report, TSL-012/88,
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ. 
  
 - Schooley, L.C., and F.E. Cellier (1988),
      
         Telescience Testbed Pilot Program, Final Report,
      Technical Report TSL-021/88,
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ. 
  
 - Schooley, L.C., and F.E. Cellier (1988),
      
         Teleoperation of a Simulated Astrometric Telescope,
      Technical Report TSL-022/88 (videotape),
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ. 
  
 - Schooley, L.C., F.E. Cellier, and R.A. Bienz (1988),
      
         Basic Research in Telescience Testbed Program,
      Final Report: NASA Grant NAGW-1073, 
      Technical Report TSL-005/88,
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ. 
  
 - Schooley, L.C., F.E. Cellier, and D.G. Schultz (1989),
      
         Teleoperation of a Fluid Handling Laboratory,
      Technical Report TSL-023/89 (videotape),
      Dept. of Electr. & Comp. Engr., University of Arizona,
      Tucson, AZ.
 
 
   Deutsche Version 
   Homepage 
 
Last modified: February 26, 2011 -- © François Cellier